Rebuild Kit - F 4L 912W [Major]

This kit contains:

• Piston [STD] F 912 / W [100.00 mm][4-Ring] (x 4)
• Ring Set [STD] BF / F 912 / W (x 4)
• Liner [Cylinder / Air Cooled / Finished] [100.0 mm] (x 4)
• Main Bearing Pair [STD] 912 / 913 [70.00 mm] (x 5)
• Stop Ring / Thrust Bearing [STD] 912 / 913 [OUT] (x 1)
• Stop Ring / Thrust Bearing [STD] 912 / 913 [IN] (x 1)
• Rod Bearing Pair [STD] 912 / 913 [60.00 mm] (x 4)
• Rod Bushing [35 mm] 912 / 913 (x 4)
• Exhaust Valve [45°] BF / F 912 / 913 / 914 [3-Groove] (x 4)
• Intake Valve [45°] 912 / 913 [3-Groove] (x 4)
• Valve Cone / Cotter / Keeper / Collet [3-Groove / Notch] (x 16)
• Valve Guide [STD] 912 / 3 / 511 [Old Style] (x 8)
• Valve Seat Insert [EX / 45°] BF / F 912 / 913 / 914 (x 4)
• Valve Seat Insert [IN / 45°] F 912 / 913 (x 4)
• Gasket Kit [Full] F 4L 912 / 913 / W (x 1)
• Injector Washer [Side Feed] 912 / 511 / 413FW (x 4)
• Intermediate Ring [1.50 mm] 912NG / 913 / 914 (x 4)
• Tappet [Valve / Mechanical] 912 / 913 / 914 (x 8)
• Rocker Arm Bushing [Shaft] 511 / 912 / 913 (x 8)
• Needle Sleeve / Bearing Bushing [Valve Drive] (x 8)
• Thrust Pad [Valve Drive / Rocker Arm] (x 8)
• Nozzle [Fuel Injector] F 511W / 912W (x 4)
• Fuel Pump [w / the O-Seal] 3-6 Cyl. 912 / 913 / W (x 1)
• Fuel Filter [Spin-On] F 3 / 4 / 6L 912 / 913 (x 1)
• Oil Filter [Spin-On] 912 / 913 / 914 / 1012 / 2012 (x 1)
• Oil Pump [40 Litre] 3 / 4L 912 / W / 913 (x 1)
• Head Bolt - 912 / 913 / 914 [Zinc] (x 16)
• Camshaft Bushing - 912 / 913 / 914 (x 1)
• Rod Bolt [19mm Head] 912 [Unwtd] (x 8)
• Sleeve [Crankshaft / Rear] 912 / 913 / 914 (x 1)